Natural Rubber
Rubber Grommet
A flexible rubber ring that protects wires, cables, and tubes from damage while reducing vibration and noise.
- Hardness: 30–80 Shore A
- Application: Cable, wire, hose, and tube protection
- Temperature: -40°C to +70°C
EPDM Rubber
Rubber Cushion
It is designed to provide cushioning, vibration isolation, shock absorption, sealing, and protection in industrial, automotive, electrical, construction, and machinery applications.
- Polymer: Natural Rubber (NR)
- Hardness: 40–90 Shore A
- Elongation at Break: 250–600%
Natural Rubber
Rubber Bush
A Natural Rubber Bush (Rubber Bushing) is a flexible component made from natural rubber (NR), often bonded with an inner and/or outer metal sleeve.
- Hardness: 40–90 Shore A
- Temperature: -40°C to +70°C (up to 80°C intermittently)
- Density: 0.92–0.98 g/cm³
Natural Rubber
Rubber O-Ring
A Natural Rubber O-Ring (NR O-Ring) is a circular sealing ring made from natural latex rubber. It is designed to fit into a groove between two mating surfaces to prevent the leakage of liquids, gases, or air.
- Density: 0.92–0.98 g/cm³
- Elongation: 500–700%
- Resistance: Moderate
Rubber
Rubber Frosting Holder
A durable rubber component designed to securely hold, support, and protect parts, cables, or equipment while reducing vibration and movement.
- Type 1 750ml MHB Frosting Holder
- Type 2: 750ml Frosting Holder
- Type 3: 180ml MMV NIP Gwala Frosting Holder
- Type 4: 180ml MHB Frosting Holder
- Type 5: 180ml Frosting Holder
- Type 6: Perfume Frosting Holder
- Type 7: 375ml MHB Frosting Holder
- Type 8: 375ml MHB2 Frosting Holder
- Type 9: 375ml 2 Frosting Holder
- Type 10: 1000ml Frosting Holder
EPDM Rubber
Rubber Gasket
An EPDM (Ethylene Propylene Diene Monomer) Rubber Gasket is a sealing component made from synthetic rubber that provides an airtight and watertight seal between two mating surfaces.
- Hardness: 40–90 Shore A (Standard: 60–70 Shore A)
- Working Temp: -40°C to +120°C (Special grades up to +150°C)
- Max Pressure: > 5 Bar
EPDM Rubber
Sleeve Guard
It is designed to protect cables, pipes, shafts, rods, hoses, and mechanical components from abrasion, weather, dust, moisture, chemicals, and vibration.
- Hardness: 40–80 Shore A
- Tensile Strength: 7–15 MPa
- Features: Single/Multi-Hole options
Neoprene Rubber
CNG Cap
A CNG Cap made from Neoprene rubber is a protective component designed to cover and seal CNG (Compressed Natural Gas) filling nozzles, valves, connectors, or fittings.
- Hardness: 40–80 Shore A (Standard: 60 ± 5 Shore A)
- Working Temp: -40°C to +120°C
- Density: 1.23–1.50 g/cm³
Nitrile Rubber
O-Ring
A Nitrile O-ring, also known as NBR (Nitrile Butadiene Rubber) or Buna-N, is one of the most commonly used sealing components in industrial applications.
- Hardness: 60–90 Shore A
- Working Temp: -40°C to +120°C
- Density: 1.0–1.3 g/cm³
EPDM Rubber
Rubber Grommet
An EPDM (Ethylene Propylene Diene Monomer) Rubber Grommet is a protective rubber component designed to fit into holes in metal, plastic, or composite panels.
- Hardness: 50–80 Shore A (Standard: 60–70 Shore A)
- Elongation at Break: 250–500%
- Tensile Strength: 7–15 MPa
Neoprene Rubber
Waterlock Cap
A Waterlock Cap (Neoprene) is a flexible rubber sealing cap designed to provide a watertight, dustproof, and weather-resistant seal for pipes, tubes, fittings, cables, and other industrial components.
- Tensile Strength: 8–15 MPa
- Working Temp: -40°C to +120°C
- Specific Gravity: 1.20–1.50
Neoprene Rubber
Boot Housing
It is designed to protect moving mechanical parts from contaminants such as dust, dirt, water, grease, oil, and chemicals while allowing movement and flexibility.
- Hardness: 40–90 Shore A
- Working Temp: -40°C to +120°C
- Elongation at Break:250–600%
Nitrile Rubber
Rubber Gasket
A Nitrile Rubber (NBR) gasket, also known as Buna-N, is a synthetic rubber sealing material widely used in industrial and automotive applications.
- Hardness: 60–90 Shore A
- Tensile Strength: 10–20 MPa
- Density: 1.0–1.5 g/cm³
Neoprene Rubber
CDI Rubber
CDI Rubber generally refers to Neoprene Rubber (CR - Chloroprene Rubber) used in industrial applications. Neoprene is a synthetic rubber produced by polymerizing chloroprene.
- Hardness: 40–90 Shore A
- Working Temp: -55°C to +200°C
- Tensile Strength: 10–25 MPa
Silicon Rubber
Rubber Gasket
A silicone rubber gasket is a sealing component made from silicone elastomer.
- Hardness: 20–80 Shore A
- Working Temp: -60°C to +230°C
- Elongation at Break: 200–700%
Nitrile Rubber
All Parts
Multi-ply polyester reinforced VMQ silicone sleeves designed to handle turbocharger boost pressures and thermal cycles.
- Reinforcement: 3-Ply Polyester Mesh
- Working Temp: -55°C to +200°C
- Max Pressure: > 5 Bar
Neoprene Rubber
O-Ring
It is widely used in industrial, automotive, HVAC, plumbing, marine, and general engineering applications because of its balanced resistance to weathering, oils, and moderate chemicals.
- Hardness: 40–90 Shore A (70 Shore A is most common)
- Working Temp: -40°C to +120°C
- Density: 1.23–1.50 g/cm³
EPDM Rubber
O-Ring
An EPDM (Ethylene Propylene Diene Monomer) O-ring is a circular rubber sealing component designed to prevent leakage of liquids and gases between two mating surfaces.
- Hardness: 40–90 Shore A
- Working Temp: -40°C to +120°C
- Tensile Strength: 7–21 MPa
Silicon Rubber
Rubber Nipple
It is made from food-grade or medical-grade silicone, which is safe, durable, and resistant to heat.
- Hardness: 40-60 Shore A
- Working Temp: 200°C to 220°C
EPDM Rubber
Protector Coat
It is applied to metal, plastic, concrete, or other substrates to protect them from environmental damage, weathering, moisture, chemicals, UV radiation, and mechanical wear.
- Hardness: 40–90 Shore A
- Working Temp: -40°C to +120°C
- Elongation at Break: 250–600%
Neoprene Rubber
CA Cap
CA Cap Rubber (Neoprene) is a precision-molded protective cap made from Neoprene rubber (Polychloroprene, CR).
- Hardness: 60 ± 5 Shore A (typical)
- Working Temp: -40°C to +120°C
- Tensile Strength: 10–20 MPa
Butyl Rubber
Rubber Pad
A Butyl Rubber Pad is a high-performance elastomer pad manufactured from Butyl Rubber (IIR – Isobutylene Isoprene Rubber).
- Hardness: 40-80 Shore A
- Working Temp: -40°C to +120°C
- Density: 1.1-1.4 g/cm³
EPDM Rubber
CDI Rubber
CDI Rubber (EPDM) generally refers to EPDM (Ethylene Propylene Diene Monomer) rubber compounds manufactured or supplied for industrial applications.
- Elongation: 300–600%
- Density: 1.10–1.60 g/cm³
- Tensile Strength: 7–20 MPa
Natural Rubber
Paddle Rubber
Paddle Rubber (Natural) is a custom-manufactured rubber component made primarily from natural rubber (NR).
- Hardness: 40–80 Shore A
- Density: 0.92–1.20 g/cm³
- Tensile Strength: 18–25 MPa
EPDM Rubber
Handle Grip
An EPDM Handle Grip is a rubber grip designed to fit over handles, rods, pipes, or levers to provide a comfortable, non-slip, and durable gripping surface.p>
- Hardness: 40–80 Shore A (typically 60–70 Shore A)
- Working Temp: -40°C to +120°C (up to 150°C for special grades)
- Density: 1.10–1.40 g/cm³
